I can tell you some quick measurements to take to determine if the Brophy Clamp On Camper Tie-Downs # HSBP will fit your 2006 Dodge Ram, but these are universal tie-downs and there is not an application guide specific to your truck.
That said, it is likely they do fit your truck, but to make sure start by measuring your bed rail width, which needs to be 5-1/2 inches or less. You also need at least 2 inches of space underneath your bed rail, and they won't work with drop-in bed liners or... view full answer...
Yes, the Custom install kit, item # RP50140-58, does work with Mega Cab models (see instructions).
Always measure truck and trailer before installing hitch to be sure that there is clearance at the cab and at the bumper to allow for maneuvering. You may need to use a Sidewinder to gain enough clearance between the cab and trailer loft to make turns up to 90 degrees. Our Sidewinder page (see link) has a formula for determining the clearance you will need and if you will need a Sidewinder.... view full answer...
Yes, the Kodiak Disc Brake Kit, # K2HR712, will fit 7,000 pound Dexter trailer axles. It is also designed to fit 16 inch and larger wheels with an 8 on 6-1/2 inch bolt pattern. You can check your existing bearing numbers to determine if this kit or another will fit your axle. If you have # 25580 inner bearings and # 14125A inner bearings, 16 inch or larger wheels with an 8 on 6-1/2 bolt pattern, this kit will work.
The bearings and seals for this kit are sold separately, but the races... view full answer...
For your 2007 Dodge 2500 you will want the Curt Custom Fifth Wheel Installation Kit for Dodge Ram # C16420-204.
You also may be interested in the Curt 5th Wheel/Gooseneck Custom Wiring Harness w/ 7-Pole Connector - 7' Long # C56071 to add a second 7-way to your vehicle for easy connection access. view full answer...
The Air Lift LoadLifter 7500 XL Air Helper Springs part # AL57595 which are a fit for the 2500 and 3500 models of the 2007 Dodge Ram install in place of the factory bump stop which the B&W Turnoverball Underbed Gooseneck Trailer Hitch part # BWGNRK1313 does not interfere with therefore yes, they will work together without issue. view full answer...
You will definitely need the B&W Companion Slider, part # BWRVK3400. As for the numbers, it looks like the 32" - 54" = -22" is correct. That number seems high though, so you might want to check those measurements again.
Either way, the Companion Slider has 12" of travel, so you won't be able to make a full 90-degree turn. That's okay because many people can still pull their 5th wheels without needing to make a full 90-degree turn. You will just need to test drive this in a parking lot... view full answer...
Yes, you can place the Adjustable Width Trailer Hitch Receiver # 13703 behind your wiring on your 5th wheel RV camper. Do be sure to verify the dimensions with any hitch mounted accessory you intend to use that you will have enough clearance around any parts of your 5th wheel such as the rear bumper. If you do not have enough length to clear a rear bumper or other parts of your 5th wheel you may need to reroute the trailer wiring. view full answer...
The Curt 600 Series Gooseneck Installation Kit for Dodge Ram # C60661 will not interfere with the installation of the Roadmaster Rear Anti-Sway Bar # RM-1129-124 on your 2005 Ram 2500.
If you're trying to combat side-side sway then you can also swap out your factory bumpstops with the SumoSprings Solo Custom Helper Springs # SSR-302-54. The installation is super simple and since it's just a replacement of the OEM bumpstop it won't interfere with any of the other components you have installed.... view full answer...
We have a couple of options for you, though I checked with all the roof rack manufacturers and there are no clamp-on roof rack fits for your 2006 Dodge Ram Mega Cab. If you did want to go with a roof rack, the only option is from SeaSucker, which is a vacuum-mounted rack, the SeaSucker Monkey Bars Roof Rack # 298-SX6000B.
This is just as strong as a standard roof rack, using vacuum cups that attach to your roof which makes it really easy to take on and off so it's really convenient. The... view full answer...
The B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit # BWGNRK1313 is exactly what you need. The custom installation kit is specifically designed to fit your 2007 Dodge Ram 2500. This will allow you to tow a gooseneck trailer or a 5th wheel trailer if you add the Companion # BWRVK3500-5W. The ball stores upside down when not in use for full bed access.
I have attached an installation video for your reference. view full answer...
Using a weight distribution system is a good way to maximize towing safety. A weight distribution system transfers the load at the rear of the vehicle to all of the axles of the vehicle and the trailer. With the load distributed to all of the axles that will level off the vehicle and improve the performance and safety.
You will want to choose a weight distribution system that will have a tongue weight range that will be able to handle the trailers tongue weight. Tongue weight is 10 to... view full answer...
The Curt # E-3S bumper hitch is a universal application, so it does not have vehicle specific fits. This hitch would mount using four holes, two that would use 3/4 inch diameter bolts, and two that use 1/2 inch diameter bolts.
You will need to measure to determine if the # E-3S hitch will work on your 2007 Dodge Ram 1500. The 3/4 inch holes are 8-3/4 inches apart, from center to center, and the 1/2 inch holes are 6-1/6 inches apart from center to center. These holes would need to... view full answer...
The Curt Q24 5th wheel trailer hitch # C16245 will fit in industry standard above the bed rails. The Husky rails that you have are indeed industry standard so the hitch will fit! I have included a picture showing the hitch mount spacing for industry standard rails for you. view full answer...
If this was previously installed on your 2006 Dodge Ram 2500 it would have used the B&W Turnoverball Underbed Gooseneck Trailer Hitch # BWGNRK1313-5W. This is compatible with the 2003-2013 Dodge Ram Pickup 2500 - 8 Foot Bed.
In order to use the B&W Companion on your 1993 Dodge Ram Pickup with 8 foot bed you would need to install the # BWGNRK1300-5W. This is the correct B&W turnoverball underbed gooseneck trailer hitch for the 93 Ram. view full answer...
The Rhino-Rack roof mounted cargo basket # RMCB will fit on crossbars that are up to 3-1/2 by 1-1/2 inches and with a spread (center to center distance between the bars) of 21 to 30 inches. Measure the bars on your 2015 Jeep to determine if they fall within the specs listed above. view full answer...
I have spoken to Tuson about this issue and there is no way to tell beforehand if the intermittent vehicle OBD network connection will happen, unfortunately. However, as you have a 2003 Ram 3500 and this is listed as being a problem with some Ram trucks from 2005 to 2009 and I have not seen or heard of any issues with trucks before this year span, there should not be any issue with this working for your application. The only thing is that I cannot say that 100% for sure. Which is a huge... view full answer...
Yes, the Thule Hullavator Pro Kayak Carrier # TH898 will fit your Rhino-Rack square crossbars. Just make sure that you're able to have the 4"-8" of overhang for the towers so the Hullavator doesn't contact your vehicle and you'll be good to go! view full answer...
Yes, I contacted the manufacturer directly who confirmed the HappiJac Original Turnbuckles for Camper Tie-Downs # LC182898 will fit your 2008 Dodge 2500 pickup with frame mounted tie downs.
Included is a video resource with additional information. view full answer...
The Timbren Rear Suspension Enhancement System, # TDR1500DQ, is a confirmed fit on both the two-wheel-drive and four-wheel-drive versions of the 2013 Dodge Ram 1500, and will work with your vehicle. Coil springs are not an issue with this system, as evidenced by the video I've linked to below, which shows them being installed on a Ram with coil springs. I've also included a link to a video review of this product for you. view full answer...
The Reese Revolution (also called Sidewinder) pivoting 5th wheel pin boxes cannot be used with any type of gooseneck-to-5th-wheel adapter so for your 2006 Dodge Ram 2500 short bed with a goose neck ball in the bed you will need to remove and replace the gooseneck hitch with a 5th wheel.
You can use custom-fit 5th wheel install kit # C16420-204 from Curt which will save you installation time by eliminating some drilling. This will provide industry-standard rails (ISRs) that will accept... view full answer...
Go To Results